One Page Product Summary 

Fax Modems 
These software modems feature direct 64Kb/s PCM interface, HDLC, and block oriented I/O for processor sharing with other applications. The code is structured for easy implementation of multiple independent modems in one processor.  All software (with exception of 'C' version) is written in the native assembly language.

 ANSI 'C' (fixed point math)          V.21, V.27ter, V.29, V.17
 TI TMS320C55x (fixed point)          V.21, V.27ter, V.29, V.17  
 TI TMS320C54x (fixed point)          V.21, V.27ter, V.29, V.17
 TI TMS320C5x  (fixed point)          V.21, V.27ter, V.29, V.17
 TI TMS320C3x/4x (floating point)     V.21, V.27ter, V.29, V.17
 TI TMS320C6x  (fixed point)          V.21, V.27ter, V.29  
 Motorola 5600x/563xx (fixed point)   V.21, V.27ter, V.29, V.17
 NEC 77xxx (fixed point)              V.21, V.27ter, V.29, V.17 
 

Data Modems 
These full duplex data modems are used in combination with ILLICO's FAX relay capability to provide data relay.  The V.23 modem supports Caller I.D.

 TI TMS320C54x (fixed point)   V.32bis,V.22bis,Bell 212A,V.21,Bell 103
 TI TMS320C5x  (fixed point)   V.32bis,V.22bis,Bell 212A,V.21,Bell 103   
 TI TMS320C3X/4X (floating pt) V.32bis,V.22bis,Bell 212A,V.21,Bell 103
 C-LANGUAGE                    BELL 103, V.21, V.23
 C-LANGUAGE; TMS320C54x        HDLC Encoder/Decoder    

			

Multi-tone Detection 
Two multi-tone detection modules are available. The first module provides detection for CCITT Q.320 (R1 signaling), Q.441 (R2 signaling), and call progress (busy, ring back, and dial tone). The second module implements DTMF detection. 

 TI  TMS320C3x (floating point) R1, R2B, R2F, and call progress.
 TI  TMS320C3x (floating point) DTMF

Cellular Text Telephone Modem
The cellular text modem (CTM) provides transparency of traditional TTY signals over cellular systems. This product conforms to the 3rd Generation Partnership Project specification and has been optimized for the C54x processor family.

 TI  TMS320C54x/C55x (fixed point)   Specification TS 26.226: Cellular Text Telephone Modem

FAX/Data Relay Control Software  (This product offering is discontinued)
Relay control software provides modem control, data formatting, and end-to-end communications control for relay of FAX and data on compressed voice networks. Combined with ILLICO's assembly language Group 3 FAX and data modems, relay software creates a complete relay capability in a single Digital Signal Processor. ILLICO FAX/data relay control software is written in 'C' language for portability and ease of customization. Since the software implements control rather than signal processing functions, it compiles efficiently into assembly language modules for the host DSP. Complete FAX/data relay applications (control software and modems) are available for the T.I. TMS320C5x, TMS320C54x, and the TMS320C3x/4x processors.

 
 

* * * 

 
 

Home | Contact us | About us | One Page Summary | Custom Projects

 
 

Fax Modem | Fax / Data Relay | V.32bis | V.22bis | Multi-Tone | Cellular Text Modem | HDLC | V.21/V.23

 
 

ILLICO Copyright 1995-2009. All Rights Reserved.

ILLICO : 765-82 San Antonio Avenue - Palo Alto, California 94303 USA
Phone: (650) 493-5678